The key to the correct use of the filter press is to follow a series of steps and precautions to ensure the efficient operation of the equipment, extend the service life and ensure the safety of the operation. ‌

First of all, before using the filter press, it is necessary to make preliminary preparations, including equipment inspection, filter cloth installation and material preparation. During equipment inspection, ensure that all components are in good condition, fasteners are not loose, and electrical systems are normal. The installation of the filter cloth should be flat without wrinkles, and closely fit with the filter plate, while paying attention to the material and specifications of the filter cloth and the material to be filtered. When preparing materials, ensure that the materials are pre-treated to remove large particles and suspended matter to avoid damage to the filter cloth and equipment. .

During the operation, follow the instructions of the device and observe the operating status of the device to ensure that the device is running properly. When feeding and filtering, the feeding speed and amount should be controlled to avoid excessive or too fast material resulting in equipment overload. After the filtration is completed, the filter cloth and equipment should be discharged in time and cleaned. The filter cloth and equipment should be thoroughly cleaned with water or special cleaning agent to remove residual materials and dirt. After cleaning, the filter cloth and equipment should be dried for next use.

In terms of maintenance, the filter press should be regularly inspected and maintained, including checking whether the components are intact, whether the fasteners are loose, and whether the electrical system is normal. If a problem is found, handle it in time to prevent the problem from affecting the normal operation of the device. The maintenance of the lubrication system is equally important, and the lubricating oil should be checked and replaced regularly to ensure that the lubrication system is in good condition. .

In addition, there are some safety precautions that need to be followed, such as the operator should be professionally trained to ensure that the person using the filter press has the necessary knowledge and skills. When using the filter press, all regulations and safety measures in the operating manual should be complied with to ensure that the number of filter plates used is not less than the mechanical design number, and the whole is neat and not wrong. The hydraulic pressure, feed pressure and filter chamber pressure do not exceed the specified range of the machine. When the filter press is pressed and returned, human guards are needed to prevent endangering the safety of life. .

In summary, the correct use of the filter press requires comprehensive consideration and practice from multiple aspects such as preliminary preparation, operation process, maintenance and safety precautions. .